Download irrt driver for gateway

This is a hardware compatibility list for portable computers. We want to keep it as accurate as possible, but please, do not entirely rely on this list when buying a portable computer. Don't forget to add how you got OSx86 running on your portable x86 computer, and to use proper English. Please see the discussion page for proper instructions on how to input your system specs. Also, please contribute to the HCL page, which should list a more granular view of compatibility. If your computer isn't listed, you should try it if you have a SSE2 or higher processor. Use vanilla kernel if it is supported.

• ONLY add hardware that you have TESTED. Don't add hardware just because you think it might work.
• Please add hardware into tables.
• This is for builds only.

Please list your computers in alphabetical order by manufacturer (Asus, Acer, Dell, HP, etc)

For how to edit the Wiki, please see this thread. Thank you!

[edit]Advent

[edit]Advent /S20II

• iAtkos S3 V2
• sleep/graphics/sound/etc everything fully working except mic input
• selected Natit,x and Aserebln kexts
• voodooHDA for sound
• use macam for usb camera
• switched abgwireless card for a broadcom BCM

[edit]Acer

[edit]Aspire One D

• Retail Installed using existing Mac
• Used Voodoo-HDA/Battery/PS2/Power & www.cronistalascolonias.com.ar
• Chameleon RC3
• Patched www.cronistalascolonias.com.ar, www.cronistalascolonias.com.ar
• On Board GMA Fully functional with internal / external display
  • Used 27ea PCI ID patch to stock kext to enable)
• Stock Wireless functional (BCM43xx enabler, ID edit to stock kext only)
• Sound Fully functional
• Web Cam functional
• Sleep Broken on wake. Hibernation broken.
• On board Atheros wired LAN not tested.
• Card Reader works (NON SDHC devices.)

[edit]Aspire

OSX

• Upgraded with a T Core2Duo
• VoodooPS2 TrackPad/Keyboard fully functional
• VoodooHDA Sound Fully Functional
• VoodooPower/Voodoo Battery (CPU Throttle/Energy Saver fully functional)
• x GMA CI/QE 32bit only (64bit x no CI/QE)
• Sleep/Wake - Fully functional
• Ethernet w/modded IONetworking Yukon2 www.cronistalascolonias.com.ar - Fully functional
• WiFI - b/g/n Apple mini-pcie - Fully functional
• PCMCIA/SDHC fully functional (www.cronistalascolonias.com.ar vd/Voodoo SDHC)
• ChameleonRC3/EFI

[edit]Aspire z

• Installation Method: Snow Leopard SSE2/SSE3 by Hazard (Without using the or update option)
• Processor: Intel T GHZ Pentium Dual Core 1MB L2 Cache
• Ram: GB DDR2 , (reports as DDR3 )
• Audio+Mic: (ALC)Fully Functional (Patched AppleHDA Kext)
• LAN: Broadcom Corporation NetLink BCMM Gigabit Ethernet[14e]
• WLAN: Not Working
• Graphics Controller: Intel GMA[a2] with QE/CI enabled

[edit]Aspire z

Snow Leopard

• Intel Pentium Dual Core T 1,73 GHz FSB
• VoodooPS2Controller fully functional
• VoodooHDA Sound fully functional
• VoodooPower/Voodoo Battery (CPU Throttle/Energy Saver fully functional)
• x GMA CI/QE 32bit only
• Ethernet with modded IONetworking Yukon2 www.cronistalascolonias.com.ar - fully functional
• PCMCIA/SDHC fully functional (www.cronistalascolonias.com.ar by Chun-nan)
• ChameleonRC3/EFI
• Guide [1]

[edit]Aspire G

(System not stable cousing Freezes)

• Retail Installed using existing Mac
• Processor Type &#;: Intel Centrino - Core 2 Duo T
• Standard Memory &#;: MB DDR3 RAM
• Hard Drive &#;: GB Seagate S-ATA (rpm)
• WiFi &#;: Intel Wireless WiFi Link (a/b/g/Draft-N) (not working)(No White list for other Wlan Cards)
• Bluetooth &#;: Acer Module (Broadcom) (not working)
• Webcam &#;: works
• Microfon:not working
• Ps2 &#;: working
• Audio &#;: with standart notworking (works with voodooHDA perfect also the media console)
• Graphics &#;: nVidia GeForce M MB Working with Efi string from GTM but freezing sometimes,not stable
• Ethernet &#;: not working
• Touchpad &#;: working (two finger scroll)

Important Notes: run the system in normal mode and install the kext u need with kexthelper or kextutility

it works perfect and u can update normaly

[edit]Aspire G

SnowOSX Universal v () for AMD Patched

• use the standart install nothing else
• Processor Type &#;: Intel Centrino - Core 2 Duo T
• Processor Onboard &#;: Intel Centrino - Core 2 Duo T (2,53 GHz, FSB, 6 MB L2 Cache)
• Standard Memory &#;: MB DDR3 RAM
• Hard Drive &#;: GB Seagate S-ATA (rpm)
• WiFi &#;: Intel Wireless WiFi Link (a/b/g/Draft-N) (not working)
• Wifi &#;: D-link usb DWL-G RTUSB with D71w_UI__04_dmg (Works Perfect)
• Bluetooth &#;: Acer Module (Broadcom) (Work Perfect)
• Webcam &#;: works
• Ps2 &#;: working
• Audio &#;: with standart notworking (works with voodooHDA perfect also the media console)
• Graphics &#;: nVidia GeForce M MB (not working with standart)- use NVinjector or other mb injector
• Ethernet &#;: Broadcom (use kext [2][3])
• Touchpad &#;: working

Important Notes: run the system in normal mode and install the kext u need with kexthelper or kextutility

it works perfect and u can update normaly

[edit]Aspire Timeline ASTG32n

• Intel Pentium U ghz
• TrackPad/Keyboard fully functional (VoodooPS2)
• Sound works (VoodooHDA)
• Battery works
• x GMA (patched driver just to get right resolution. no QE/CI)
• Sleep/Wake - not working
• Ethernet - works using atheros kext (google IATS)
• WiFI - not working (changed to BCM, got native Airport. I put it under the keyboard on the right mini-PCI-e)
• SDHC works
• Webcam works out of box

P.s. for information, mail me P.P.s. Extra folder with all required extentions here [4]

[edit]Aspire Timeline ASTGG32

OSX (Empire EFI v + Retail Build 10A + combo )

• Intel Pentium U [email&#;protected]
• TrackPad / Keyboard works (VoodooPS2)
• Sound works (VoodooHDA)
• The battery is working (in the information determined by the manufacturer Panasonic)

2 video cards. ATI + intel GMA

• x GMA (no QE / CI)
• ATI not start.&#;: (
• WiFI replaced the original intel (not start) on Broadcove BCM which he developed as a mother:)
• Ethernet is not working.
• Card Reader works

The resources: www.cronistalascolonias.com.ar?f= for the availability of distributions and "manual". Just be grateful [5] for the continuously expanding list of "utility"

p.s. I would really appreciate help in finding drivers for this model beech. Connect with me: [email&#;protected]

[edit]Aspire Timeline TZG32N

• Intel Pentium SU (2-cores)
• TrackPad/Keyboard fully functional (only after installing www.cronistalascolonias.com.ar and www.cronistalascolonias.com.ar) - you can use usb mouse and keyboard to install them-
• Sound does not work *yet*
• Battery not tested
• xx32 GMAMHD no QI/CE with Chameleon 2 RC4 patched with resolution for Snow Leopard and Intel GMA X ( www.cronistalascolonias.com.ar )
• Sleep/Wake - not working
• Ethernet not working
• WiFi Intel - not working
• PCMCIA/SDHC - works
• Booting from grub2 with multiboot
• For network connectivity I use Nintendo Wii USB2LAN Adapter (works out of the box)

[edit] Extensa z

Used this tutorial: [6]

Empire Efi and retail dualboot Windows 7

confirmed that update works

• You need AppleHDA to get sound work.

Then also the sound plugs works.

• All works in 32bits except wifi, and Build in Mic.
• in 64 bits mode you need to install x 64 bits drivers, and then Lan also don't work

[edit]Gateway

[edit]Gateway NV53

Specs:

• AMD Athlon II X2 M GHz Dual-Core
• 4GB DDR2 MHz RAM
• MP Webcam
• DVD SuperDrive
• HDMI port
• 9-in-1 card reader
• ATI Radeon HD MB (Dong's Framebuffer)
• Conextant HD Audio (AzaliaAudio)

• Install method: I used the retail Snow Leopard DVD and booted it from EmpireEFI. Did a normal install, and you will get an error at the end saying that the installation failed. Just reboot and start Smow Leopard from EmpireEFI again. For the bootloader, myHack would make the keyboard and mouse stop working, but MultiBeast seems to work. You can do a normal update to , after that, you need to download kernels and stuff.

• Dong's Framebuffer for full resolution Download
• Wireless is detected as Airport Extreme
• AzaliaAudio for sound Download
• Ethernet and Wireless ports work
• HDMI Works after Dong's Framebuffer
• 4GB of RAM in x64 Snow Leopard
• Bootloader and full 4GB RAM MultiBeast Download

[edit]Gateway " NVU Laptop

• (installed second hard drive)
• Mac OS X Snow Leopard Retail Install (followed GA-EPUD3P), directly updated to and replaced sleepenabler kext
• Intel Core 2 Duo T GHz, 4GB DDR3
• Audio works great with VoodooHDA
• Touchpad builtin-Keyboad works great with VoodooPS2
• LAN (updateM kext works) and Wireless not working, but ethernet to USB adaptor works great
• Webcam, Internal Microphone working great
• Graphics set to x and no QE, no kext for intel MHD otherwise everything works great for triple boot

[edit]Gateway MDu Laptop

• Used the "Iboot Supported + Multibeast" method. Installed from a USB hard drive. Booted into the USB installer with the "Iboot-Supported" CD I burned.
• In the USB installer, I replaced the www.cronistalascolonias.com.ar file in /System/Installation/Packages/ with www.cronistalascolonias.com.ar and replaced the OSInstall file in /System/Library/PrivateFrameworks/www.cronistalascolonias.com.arork/Frameworks/www.cronistalascolonias.com.arork/Versions/A/ with www.cronistalascolonias.com.ar to install on a dual boot configuration with a MBR formatted disk.
• Mac OS X Snow Leopard Retail Install followed by the combo update.
• Ran Multibeast to install "Easybeast for Supported CPU." In Multibeast, I also checked the boxes for VooDooHDA for the i ICH9 Intel HDA audio, and the VooDoo PS/2 controller with Trackpad Support so I didn't have to use a USB keyboard and USB mouse.
• Switched out my Intel Link a/g/Draft-N Wireless for a Broadcom mini pci card and the Broadcom card worked out of the box.
• Didn't get my Marvell Ethernet working yet.
• Webcam works out of the box but no internal microphone functionality yet.
• Graphics set to x and no QE for intel MHD. Your system might become unstable but you might have a chance at the full x resolution with this file www.cronistalascolonias.com.ar
• Brightness adjustment is non-existent.
• HDMI port not working as of yet.
• USB ports all work out of the box but the SD card reader doesn't do anything as of yet.
• Had to install the VooDoo battery kext from here www.cronistalascolonias.com.ar to get the battery status to show up in the menu bar.

[edit]Asus

[edit]EeePC HE

• What Works: Stock Wireless, Bluetooth, Ethernet, Sound, Mic, WebCam, touch pad (slightly buggy after rebooting from Windows), SD Card reader.
• What does not work: Battery Meter, Power management, Fn Keys (WiFi can be turned off but not on)
• Installation Guide: [7]
• Modded BIOS supposedly fixes ACPI problems. Download it here: [8]

Note from MoonDogg (author of Guide)&#;: Battery Meter & Power management works fine. Fn Keys can be made to work but I have no use for them so I did not include it in my guide. I also have never used the modified bios and do not know what it will do to your machine. (you have been warned!!)

[edit]EeePC HA

Hardware: Atom n, GMA , 2 GB RAM

• What does work: Atheros Ethernet, Sound (with Voodoo HDA), Mic, Cam, touchpad and keyboard, battery meter & power button (with proper DSDT), most function keys, Wi-Fi (RALink)

I used Retail Snow Leopard, Chameleon boot loader (NBI) Currently running Extended screens work, mirroring does not - vertical stipes appear. QE/CI does work&#;:)

[edit]EeePC HAB

• Atom 1,6 GHz, 1Gb
• keyboard & multitouch trackpad works
• audio works
• graphics/dispay * @ 60Hz
• Camera works
• Battery works WITH the two gig stick. (Otherwise you have to edit the www.cronistalascolonias.com.ar file with the 1 gig stick of RAM)
• Asus hot keys

- wifi DOES work stock - lan does NOT work

[9]

WiFi AR - [10] Only WEP and WPA. NOT WPA

[edit]EeePC HAM

Snow leopard

[edit]EeePC n

Snow Leopard [11]

• Atom Dual Core works with patched kernel([12])
• x86_64 kernel
• Hyperthreading
• Sound works with patched VoodooHDA
• Mic Works
• Graphics @ x
• Full GPU accleration (QE/CI)
• p playback
• HDMI out works without sound must use line out w/HDMI
• Camera works
• SD card reader works
• Function Keys for Brightness, monitor on-off, Volume, etc` (Fixed using Meklort's Asus www.cronistalascolonias.com.ar)
• Trackpad works with multi-touch gestures
• Sleep
• Restart/shutdown (with www.cronistalascolonias.com.ar)
• Bluetooth (on/off with www.cronistalascolonias.com.ar)
• AHCI
• Onboard ethernet
• Netflix streaming (use latest version of Silverlight)

- Not Working: WiFi ( Wifi card my be replaced by a Dell half mini PCI-E card or a Realteksu USB dongle)

[edit]G1S-ASG

Snow Leopard Method Empire EFI and myHack_Installer_mpkg

• audio works with www.cronistalascolonias.com.ar, you must install in "System/Library/Extensions"
• graphics works * with support for dual monitor
• trackpad works with www.cronistalascolonias.com.ar
• keyboard works with www.cronistalascolonias.com.ar
• lan works
• IEEE port works
• bluetooth works
• Intel PRO/Wireless doesn't work, I use BCMMC and it works out of box.
• Camera works with this key on chameleon boot file "USBBusFix=yes", and use CamTwist
• card reader works (SD) with www.cronistalascolonias.com.ar
• mic and line in works with www.cronistalascolonias.com.ar and you must adjust settings on "VoodooHDA prefpane"

[edit]N50VN/PRO 72 VN

Snow Leopard Method Empire EFI and myHack_installer__RC4_rmpkg

• Intel T 2,53 GHz works
• Nvidia M GT works with Enabler after changing the PCI route from 1 to 0 in www.cronistalascolonias.com.ar and Graphics Enabler value from y to Yes (dual monitor over HDMI -> perfect)
• trackpad works with www.cronistalascolonias.com.ar
• keyboard works with www.cronistalascolonias.com.ar
• LAN works
• IEEE port works
• bluetooth works
• Intel Wifi Link AGN doesn't work -> maybe anybody is able to write a kext&#;;)
• Camera does not work
• card reader works
• audio -> problem! sometimes working

[edit]F3SG

Snow Leopard

• Install Method: Retail / iBoot cd
• Intel Core 2 Duo T 2,1 GHz works (ACPI speedstep - www.cronistalascolonias.com.ar)
• Nvidia M GS works
• (dual monitor over VGA/DVI -> perfect)
• trackpad works with www.cronistalascolonias.com.ar
• keyboard works with www.cronistalascolonias.com.ar
• LAN works (www.cronistalascolonias.com.ar)
• IEEE port works
• Intel® PRO/Wireless ABG doesn't work -> maybe anybody is able to write a kext&#;;)
• Camera does not work
• card reader works
• audio (www.cronistalascolonias.com.ar)

[edit]Benq

[edit]Joybook R55E

• Install Method: Retail (10A)
• Chipset: Intel GML (Intel GMA )
• Processor: Intel Celeron M Solo Core @ GHz
• Audio: Intel G (www.cronistalascolonias.com.ar)
• LAN: Marvel Yukon 88E 10//
• Video: Intel GMA (Needs a string on www.cronistalascolonias.com.ar "6dc00da

7fffdfcbd ccec"

• SATA & IDE: The both are working. www.cronistalascolonias.com.ar from and www.cronistalascolonias.com.ar by Netkas are needed.
• Wi-Fi: Atheros AREG
• Notes: update with Combo you need "chocolate_kernel" (kernel from Empire_EFI)

[edit]Dell

[edit] inspiron m

• processor core 2 duo 1,83 works both core
• graphics intel gma work (*)
• audio sigmatel work, microfone doesen`t work
• lan works fine
• wlan Intel wireless card isn`t working; replaced with Dell
• card reader not tested

[edit] Vostro

• Install Method: Retail (10A)
• Chipset: Intel GMA (IntelGMAX)
• Processor: Intel Solo Core @ GHz
• Audio: Sigmatel STAC - www.cronistalascolonias.com.ar
• LAN: www.cronistalascolonias.com.ar (www.cronistalascolonias.com.ar) from the Retail Install.
• Video: Intel GMA X (Only on 32bit mode) (Needs a www.cronistalascolonias.com.ar Patch to fix the Black Screen)
• SATA & IDE: The both are working. www.cronistalascolonias.com.ar from and www.cronistalascolonias.com.ar by Netkas are needed.
• Important Notes: You must have a working OS X Install. If you want to get it working, you must first restore the Retail DVD to a Hard Drive (WHICH ONE??--Essentially, this setup method needs 3 hard drives: one that already has OS X installed on it; one that is blank and for extracting the contents of the install DVD and one that will be the finished snow leopard installation. restore the DVD to a spare hard drive (which will wipe all its contents) that you will use to modify the install DVD - not the one you will end up installing snow leopard onto)and than use modified www.cronistalascolonias.com.ar (WHARE TO GET THAT??-if your drive is set to boot from MBR and not GUID, you need a modified installation package which can be had here., if not, go to the os x install dvd and type Command+Shift+G and paste "/System/Installation/Packages/ and run www.cronistalascolonias.com.ar")to Install it. After that, just install Boot Think Copy the www.cronistalascolonias.com.ar file to the /Darwin Folder. Before you boot it, you must first install the drivers like www.cronistalascolonias.com.ar, www.cronistalascolonias.com.ar, www.cronistalascolonias.com.ar, www.cronistalascolonias.com.ar, www.cronistalascolonias.com.ar, www.cronistalascolonias.com.ar
• Basic Install Guide: [13]
• Here is another detailed and illustrated guide on this way of installation: [14]

[edit]Inspiron

• Install Method: iAtkos S3 V2 first, and ComboUpdate from Apple later. Update: Idem to
• OsX Version&#;: - Kernel I'm currently running in 64 bit mode, but some features from at 32 bits were lost. Update: I'm currently runing at 32 bit mode (I don't even remember what's the state of my installation or how it behaves at 64 bit)
• CPU: Intel Pentium Core 2 Duo
• Graphic card: Intel GMA X QE supported while in at 32 bit mode. I'm not sure if it can be supported on I have to downgrade kexts to stock ones from to gain some kind of support for this card in 64 bits mode. Update: I'm runing with QE Suported, at 32 bits.
• RAM: 4GB
• Hard disk: GB
• DVD-RW&#;: Works out of the box.
• LAN&#;: I don't know / I didn't try to install this, buy I think the iAtkos DVD has the drivers. Update: I still don't have this working on , after some attempts whith the iAtkos drivers.
• Firewire&#;: I don't know / I don't have firewire gadgets to try.
• Keyboard/Trackpad/Multimedia front key: Full Working using VoodooPS2 Controller on When upgraded to the trackpad stop working. Update: At everything is working OK.
• Sound&#;: Works out of the box. VoodooHDA
• Wireless&#;: Works out of the box installing the wireless drivers Broadcom that came with iAtkos.
• Bluetooth&#;: Works out of the box (or at least it seems to be, I didn't test it against anything yet)/
• Card Reader&#;: I don't know when I get a SD card I'll be back to post about it. Update: doesn't seem to be working. Update 2: It works sometimes.
• My original install configuration for (i only mention what I leave checked anything else was unchecked in my case):
  • Bootloader
  • Bootloader Option
  • Patches
    • Extra Directory
    • fakesmc
    • Disabler
    • RTC
    • EVO Reboot
  • Drivers
    • Main Hardware
      • Sata/IDE
      • Sound
      • PS/2
      • Laptop Hardware
• I post-installed this going to /System/Installation/Packages on the Install DVD later:
  • Drivers
    • Main Hardware
      • NTFS-3G

• I also added to /Library/Preferences/SystemConfiguration/www.cronistalascolonias.com.ar, under Kernel Flags, the "pmVersion=20" config, when upgrading to I'm not sure if it is really necessary (I didn't test it without it yet). I have a lot to test yet!
• Some extra notes: I never managed (never attempted actually) to make it work the hibernation / suspend modes so I just turn on/off the machine when I need it. The battery cycles doesn't seem to be working, but I think it is because the battery itself doesn't have the necessary for this (is not a software issue, I think). Sometimes (actually, in very rare occasions) the machine has a kernel panic on boot. Just force shut-down and turn it on again always solves the problem. On even more rare ocassions (maybe four or five times in a year) the machine gets frozen and I have to force shut down, which always solves the problem. In fact, actually is not frozen really, it seem the keyboard and keypad stops working (I discover this one time when this "hang" happened while air mouse was running, and this allowed to perform a clean shutdown normally.)

[edit]Inspiron

• Install Method: SnowOSX Universal
• OsX Version&#;: - Kernel - Chameleon RC1 (64bit)
• CPU: Intel Pentium Dual Core T (GHz/Mhz FSB/1MB cache)
• Graphic card: Intel GMA X
• RAM: 3GB Shared Dual Channel DDR2 (2 Dimms)
• Hard disk: GB
• DVD-RW&#;: Works out of the box.
• LAN&#;: Broadcom X 10/ - Works out of the box.
• Firewire&#;: RICOH compliant IEEE @ MHz - Works out of the box.
• Keyboard/Trackpad/Multimedia front key&#;: Full Working with multimedia keys and two finger scrolling - Used VoodooPS2 Controller.
• Sound&#;: Sigmatel &#;: VoodooHDA
• Wireless&#;: Dell b/g&#;: Broadcom 44XX kext from www.cronistalascolonias.com.ar
• Bluetooth&#;: Works out of the box
• RICOH 3 in 1 Card Reader&#;: Works with Voodoo www.cronistalascolonias.com.ar
• Power management&#;: restart, Shutdown, Battery icon&#;: Working with Voodoo Battery. Will sleep but will not wake up.
• Kext used&#;: VoodooHDA - VoodooPS2 - Voodoo Battery - Sleep Enabler - FakeSMC - AppleIntelPIIXATA - Voodoo TscSync (All kext are compiled for Snow Leopard)
• Needs to replace www.cronistalascolonias.com.ar with patched version for 64bit from www.cronistalascolonias.com.ar

• Only real issue is not being able to wake computer from sleep
• also using custom DSDT.

[edit]Inspiron

Snow Leopard Method Empire EFI and myHack_Installer_mpkg

• Very important, you must use pre configured "www.cronistalascolonias.com.ar" for this laptop model, put on /Extra
• Audio works with www.cronistalascolonias.com.ar, you must install in "System/Library/Extensions"
• Graphics works x with support for dual monitor
• Trackpad works with www.cronistalascolonias.com.ar
• Keyboard works with www.cronistalascolonias.com.ar
• Lan works
• IEEE port works
• Bluetooth works
• Dell Wifi with Broadcom chipset included and it works with "bcm43xx_www.cronistalascolonias.com.ar"
• Camera works (on model with camera)
• SD card reader not tested
• Mic and line in works with www.cronistalascolonias.com.ar and you must adjust settings on "VoodooHDA prefpane"

[edit]Inspiron

• Install Method: Snow Leopard Retail / Custom Boot
• OsX Version: with - Chameleon RC3 Bootloader
• CPU: Intel Mobile Core 2 Duo T (GHz/Mhz FSB/2MB cache)
• Graphic card: Full Function until now (haven't tested VGA output)
• Internal Cam: Works out of the box
• RAM: 4GB Shared Dual Channel DDR2 - mhz (2 Dimms)
• Hard disk: GB Serial ATA (RPM)
• DVD-RW: TSSTcorp DVD+/-RW TS-LH &#;: Works out of the box.
• LAN: Conexant HDA D MDChaven't test yet
• Keyboard/Trackpad/Multimedia front key: Full Working with multimedia keys and two finger scrolling
• Sound: Sigmatel VoodooHDA with PrefPanel (Mic and Speakers working)
• Wireless: Dell Wireless b/g/n (fully working)
• Card Reader: fully working &#;: www.cronistalascolonias.com.ar
• Power management: Restart, Shutdown, Battery icon&#;: Working with Voodoo Battery. Sleep turned off.
• Kext used: VoodooHDA - VoodooPS2Controller - Voodoo Battery - VoodooPower - VoodooSDHC - Sleep Enabler (works but causes a Kernel Panic when you Update to , therefore, leave it out and install it later) - FakeSMC - IONetworkingFamily - IOFamily - IOATAFamily - NullCPUPowerManagement - OpenHaltRestart - PlatformUUID - ClamshellDisplay - IOSDHCIBlockDevice

Everything works in just 45minutes installation. What you need is a Mac, a 8GB USB Stick, and this awesome Tutorial [15] It worked fine for me with some small changes. I had to delete VoodooPS2 out of the Boot/Extra on the USB because it caused a Kernel Panic, later on it isn't a Problem to Install it. And Sleep Enabler had to be deleted from every pint (Boot/Extra, Post-Install/Extra and Extensions) because it causes a Kernel Panic when you Update to Except this everything worked fine for me, even Sleep Enabler wasn't necessary.

[edit]Inspiron

• Install Method: Transfer from Hackintosh
• OsX Version&#;: with PC_EFI Bootloader
• CPU: Intel Mobile Core 2 Duo T (GHz/Mhz FSB/2MB cache)
• Graphic card: Not fully functional
• RAM: 3GB Shared Dual Channel DDR2 (2 Dimms)
• Hard disk: ICH9-M Toshiba GSX
• DVD-RW&#;: Optiarc ADS Works out of the box.
• LAN&#;: Marvel Yukon 88E 10/ - Works out of the box.
• Keyboard/Trackpad/Multimedia front key&#;: Full Working with multimedia keys and two finger scrolling - Used VoodooPS2 Controller with VoodooPS2Trackpad also placed into /S/L/E.
• Sound&#;: IDT HDA: VoodooHDA
• Wireless&#;: Dell b/g/n&#;: AppleAirPortBrcmkext with Dev ID inserted
• Power management&#;: restart, Shutdown, Battery icon&#;: Working with Voodoo Battery. Sleep turned off.
• Kext used&#;: VoodooHDA - VoodooPS2 - Voodoo Battery - Sleep Enabler - FakeSMC

No dsdt is required

[edit]Inspiron

• Install Method: SNOWLEO MAC Snow Leopard OSX86_64 For INTEL/AMD
• OsX Version&#;:
• Kernel&#;: Pcj XNU
• CPU: Intel® Core™ i3 M GHZ
• Graphic card: Not fully functional
• RAM: 2GB DDR3
• LAN: RealtekR
• Keyboard/Trackpad&#;: VoodooPS2 Controller with VoodooPS2Trackpad.
• Sound&#;: VoodooHDA
• Wireless&#;: Broadcom
• Power management&#;: VoodooBattery
• Bluetooth&#;: Dell BluetoothHCI
• Kext used&#;: VoodooHDA - VoodooPS2 - Voodoo Battery - FakeSMC
• can be upgrade to using combo update and before restart install legacy kernel for AMD /Pentium4[[16]]

[edit]Inspiron

• Install Method&#;: Mac Osx Snow Leopard DVD Retail
• OsX Version&#;: - Kernel (64Bits) - Chameleon RC3 Bootloader.
• CPU&#;: Intel Core2Duo T @ GHz - Dual Core Works with Voodoo TscSync.
• Graphic card&#;: Nvidia GO - QE/CI work - Resolution max: x
• RAM&#;: 2x2 Gb DDR2 PC @ MHz.
• Hard disk&#;: Gb WD SATA.
• DVD-RW&#;: Works out of the box.
• LAN&#;: Broadcom X 10/ - Works out of the box.
• Firewire&#;: RICOH compliant IEEE @ MHz - Works out of the box.
• Keyboard/Trackpad (2 Finger Scrolling)/Multimedia front key&#;: Works.
• Sound&#;: Sigmatel &#;: Works.
• Wireless&#;: Dell b/g - Works out of the Box.
• Bluetooth&#;: Works out of the box.
• RICOH 3 in 1 Card Reader&#;: Works.
• Power management&#;: Works.
• ShutDown/Reboot&#;: Works.
• Kext used&#;: VoodooHDA - VoodooPS2 - VoodooPower - Sleep Enabler - FakeSMC - EvoReboot - AppleIntelPIIXATA - www.cronistalascolonias.com.ar - Voodoo TscSync (All kext are compiled for Snow Leopard 64Bits)
• NOT WORKING PARTS&#;: Original Intel a/b/g wireless card changed by Dell a/b/g.

[edit]Latitude D / DC

• Install Method: Mac OS X Snow Leopard Universal v - By following this GUIDE
• Version&#;: - Kernel - Chameleon RC3 Bootloader.
• Install every kexts available form the customize button during install.
• CPU: Works out of the box
• Graphic card: Works out of the box
• LAN&#;: Works out of the box
• Keyboard/Trackpad/Multimedia front key&#;: Works out of the box
• Sound&#;: OK
• Wireless&#;: Not working
• Bluetooth&#;: Works out of the box
• Power management&#;: Restart, Shutdown - Working; Battery Icon - Works out of the box;

[edit]Latitude D

• Install Method: Chameleon rc3 & Netkas - you may use above GUIDE or search www.cronistalascolonias.com.ar from leppym (by the way - thanks great work!!)
• Version&#;: - Kernel - Chameleon RC3 / Netkas Bootloader (Also Boot works as long as you have al kexts!))
• Installed kexts in E/E: www.cronistalascolonias.com.ar

www.cronistalascolonias.com.ar AppleIntelGMAkext www.cronistalascolonias.com.ar www.cronistalascolonias.com.ar www.cronistalascolonias.com.ar www.cronistalascolonias.com.ar www.cronistalascolonias.com.ar www.cronistalascolonias.com.ar www.cronistalascolonias.com.ar www.cronistalascolonias.com.ar www.cronistalascolonias.com.ar www.cronistalascolonias.com.ar www.cronistalascolonias.com.ar legacySTACkext www.cronistalascolonias.com.ar www.cronistalascolonias.com.ar www.cronistalascolonias.com.ar www.cronistalascolonias.com.ar www.cronistalascolonias.com.ar www.cronistalascolonias.com.ar www.cronistalascolonias.com.ar www.cronistalascolonias.com.ar www.cronistalascolonias.com.ar www.cronistalascolonias.com.ar www.cronistalascolonias.com.ar www.cronistalascolonias.com.ar

• CPU: Dual Core OOB
• Graphic card: Works out of the box but 32bit only (--> means also kextcache i & bootflags correctly!!)
• LAN&#;: OOB
• Keyboard/Trackpad/Multimedia front key&#;: OOB
• Sound&#;: OOB
• Wireless&#;: Intel Not working!!! Dell/Broadcom works OOB
• Bluetooth&#;: OOB
• Power management&#;: Restart, Shutdown - OOB
• Battery Icon - OOB

[edit]Latitude D

Using iBoot disable SPEEDSTEP and dual core functionality to allow easier control of mouse. CD-ROM access will still "stutter" mouse while drive is running.

[edit]Latitude D

• Install Method: Mac OS X Snow Leopard DVD retail Build 10A
• Version&#;: - Kernel - Chameleon RC3 Bootloader.
• CPU: Intel Core2Duo T @ GHz, Intel Core Duo - www.cronistalascolonias.com.ar
• Graphic card: Nvidia Quadro NVS M - 19x12 - NVKush.
• LAN&#;: Broadcom www.cronistalascolonias.com.ar
• Keyboard/Trackpad/Multimedia front key&#;: PS2KeyboardFix
• Sound&#;: Sigmatel - www.cronistalascolonias.com.ar
• Wireless&#;: Dell b/g&#;: Works out of the Box
• Bluetooth&#;: Works out of the box
• Power management&#;: Restart, Shutdown - Working; Battery Icon - VoodooBattery;

[edit] Latitude E

• Install Method: Retail
  • Change SATA mode in BIOS from IRRT to AHCI
    • If you've reinstalled Vista and dual-boot and vista bluescreens with "cant' find boot device", change back to IRRT, boot into vista, and follow these instructions to enable AHCI in Vista: [17]
  • I attached the SATA drive to a working OSX install
  • Partition drive, label it "Laptop" or something.
  • Run www.cronistalascolonias.com.ar on the drive from Retail CD (Command-G /Volumes/OS X Snow Leopard/System). (don't reboot)
  • Install Chameleon 2 RC3 on boot drive
  • Copy KEXTs below to /Volumes/Laptop/System/Library/Extensions using OSX86Utils
• CPU Intel Core2 Duo T @GHz - NullCPUPowerManagement, OpenHaltRestart,
  • • SpeedStepping now works with VoodooPowerMini: [18]
    • Shutdown/Sleep/Restart does not work properly with GraphicsEnabler. Waiting for solution.
• Keyboard: AppleACPIPS2Nub, ApplePS2Controller
• Trackpoint: Same as Keyboard
• Graphic Card: NVidia Quadro NVS M - GraphicsEnabler=Yes
• LAN: Intel GigE - www.cronistalascolonias.com.ar
• WLAN: Dell Wireless (Broadcom ) - Broadcom AirPort Enabler - [19]
  • This just patches the Apple AirPort driver and adds the to www.cronistalascolonias.com.ar
• Sound: IDT HD Audio - VoodooHDA (get the patched version here for proper volume [20]
• Battery: VoodooBattery +[21]
• UUID: PlatformUUID (removes UUID errors from logs)

www.cronistalascolonias.com.ar:

<?xml version="" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST //EN" "www.cronistalascolonias.com.ar"> <plist version=""> <dict> <key>Kernel</key> <string>mach_kernel</string> <key>Kernel Flags</key> <string>arch=i</string> <key>GraphicsEnabler</key> <string>yes</string> <key>Timeout</key> <string>3</string> </dict> </plist>

Upgrades to OK. Need to re-apply AirPortEnabler script after patching.

[edit] Mini 9 & Dell Mini 10v

• Install Method: Retail
• Forum: [22]
• Installer: [23]
• Easy Install Guide [24]

[edit]Dell Studio XPS

[edit] Dell XPS

• Install Method: Retail with iBoot nVidia Build 03/01/ Thanks Tony Mac!
• Version&#;: Version&#;: 64 Bit
• CPU&#;: Intel Core2Duo T @ GHz - Recognized correctly OOTB but with stuttering. Running single core fixes issue. Using this config until fix found.
• RAM&#;: 4GB Recognized - GB Useable
• Hard Drive&#;: WDC GB " SATA
• Graphic card&#;: nVidia GO GS - QE/CI works OOTB.
• DVD-RW&#;: Optiarc DVD+/-RW - Works OOTB.
• LAN&#;: Broadcom - Not recognized OOTB, found kext, after several other Broadcom Kexts
• Firewire&#;: Untested
• Keyboard/Trackpad (2 Finger Scrolling)/Multimedia front key
• Sound&#;: Sigmatel &#;: Works OOTB.
• Wireless&#;: Broadcom does not. Searching
• Bluetooth&#;: Not tested.
• RICOH 3 in 1 Card Reader&#;: Works out of the box.
• Power management&#;: Not working. Will not wake from display sleep.
• ShutDown/Reboot&#;: Works.
• Kext/patch used&#;: NIC,

[edit]

[edit]HP

=== Pavilion txau === OS Snow Leopard Intel AMD made by Hazard

Install Method

Press F9 during boot and select to boot from CD (you must do this or you will get the www.cronistalascolonias.com.ar error) The disk will stop booting at IOAPIC: Version 0x11 Vectors Double-Tap your Power Button and it will continue loading Format your Partition or Disk using the Disk Utility during setup Click the Customize button before installing & select the following options * anv kernel with www.cronistalascolonias.com.ar * chameleon rc3 pc efi * boot options * force_wake and graphics_enabler * amd_patch * remove apple tymce driver leagacy apple rtc * Graphics Drivers * NVidia Driver Let the disk install once it's finished you should have a more or less working install of snow Leopard * Remember to press F9 and choose your Hard Drive to avoid the www.cronistalascolonias.com.ar error * And also remember to Double-Tap your power button to get it to boot

. .

[edit] HP ProBook s

[edit] Install Method

• Download iBoot-Legacy by Tonimac and burn it
• Cut Retail Snow Leo DVD to 4,3Gb or download Single-layer distribution (to burn it on singal-layer DVD, because it would not start from usb disk or usb hard drive, only from DVD)
• Insert iBoot CD in your drive, when boot eject iBoot, insert Snow Leo DVD and push F5 on your keyboard. Than press enter.
• Formatted drive as GUID and started installing
• After install restart and enjoy

[edit] Notes

• See how to update to in HLC

[edit] HP GDX

[edit] Install Method

• Boot and install from SnowLeo OS X86 DVD(from The Pirate Bay) - No problems booting, hanging, etc.

[edit] Additional KEXTS

• VoodooHDA
• Apple PS/2 v2 - Voodoo PS/2 DOES NOT WORK AT ALL, only Apple PS/2 v2 gives you control over the cursor speed in SYS. PREFS.
• Realtek RTL Ethernet
• Voodoo Battery Monitor
• Apple Battery Monitor
• Intel GMA KEXT, get from [25] - without this your stuck with xx32

[edit] Kernel Recommendations

• Chocolate is your best bet, MACH panics consistently when doing stuff like messing around in PhotoBooth

[edit] What Works

• With Chocolate Kernel, no problems booting, hanging, anything. Using standard MACH, you need to use -x -f on first boot after installing, but its ok on its own after that.
• Internal Ethernet works perfectly
• Video works well, after installing the Intel GMA KEXT, you will get a decent range of resolutions, x up to x
• QuartzGL works after being enabled in OSX86TOOLS
• Audio works %