Download arranha ceu torrent

A skyscraper is a large continuously habitable building having multiple floors. Modern sources currently define skyscrapers as being at least metres^[1] or metres^[2] in height, though there is no universally accepted definition. Historically, the term first referred to buildings with between 10 or 20 stories when these types of buildings began to be constructed in the s.^[3] Skyscrapers may host offices, hotels, residential spaces, and retail spaces.

One common feature of skyscrapers is having a steel framework that supports curtain walls. These curtain walls either bear on the framework below or are suspended from the framework above, rather than resting on load-bearing walls of conventional construction. Some early skyscrapers have a steel frame that enables the construction of load-bearing walls taller than of those made of reinforced concrete.

Modern skyscrapers' walls are not load-bearing, and most skyscrapers are characterised by large surface areas of windows made possible by steel frames and curtain walls. However, skyscrapers can have curtain walls that mimic conventional walls with a small surface area of windows. Modern skyscrapers often have a tubular structure, and are designed to act like a hollow cylinder to resist wind, seismic, and other lateral loads. To appear more slender, allow less wind exposure and transmit more daylight to the ground, many skyscrapers have a design with setbacks, which in some cases is also structurally required.

As of January ^[update], only nine cities have more than skyscrapers that are &#;m (&#;ft) or taller: Hong Kong (), Shenzhen (), New York City (), Dubai (), Shanghai (), Tokyo (), Chongqing (), Chicago (), and Guangzhou ().^[4]

Definition[edit]

The term skyscraper was first applied to buildings of steel-framed construction of at least 10 storeys in the late 19th century, a result of public amazement at the tall buildings being built in major American cities like Chicago, New York City^[5], Philadelphia, Detroit, and St. Louis. The first steel-frame skyscraper was the Home Insurance Building (originally 10 storeys with a height of 42&#;m or &#;ft) in Chicago, Illinois in ^[6] Some point to Philadelphia's storey Jayne Building (–50) as a proto-skyscraper,^[7] or to New York's seven-floor Equitable Life Building (New York City), built in , for its innovative use of a kind of skeletal frame,^[8] but such designation depends largely on what factors are chosen. Even the scholars making the argument find it to be purely academic.^[9]

The structural definition of the word skyscraper was refined later by architectural historians, based on engineering developments of the s that had enabled construction of tall multi-storey buildings. This definition was based on the steel skeleton—as opposed to constructions of load-bearing masonry, which passed their practical limit in with Chicago's Monadnock Building.

What is the chief characteristic of the tall office building? It is lofty. It must be tall. The force and power of altitude must be in it, the glory and pride of exaltation must be in it. It must be every inch a proud and soaring thing, rising in sheer exaltation that from bottom to top it is a unit without a single dissenting line.

—&#;Louis Sullivan's The Tall Office Building Artistically Considered ()

Some structural engineers define a highrise as any vertical construction for which wind is a more significant load factor than earthquake or weight. Note that this criterion fits not only high-rises but some other tall structures, such as towers.

Different organizations from the United States and Europe define skyscrapers as buildings at least metres in height or taller.,^{[10][11][5][12]} with "supertall" skyscrapers for buildings higher than &#;m (&#;ft) and "megatall" skyscrapers for those taller than &#;m (1,&#;ft).^[13]

The tallest structure in ancient times was the &#;m (&#;ft) Great Pyramid of Giza in ancient Egypt, built in the 26th century BC. It was not surpassed in height for thousands of years, the &#;m (&#;ft) Lincoln Cathedral having exceeded it in –, before its central spire collapsed.^[14] The latter in turn was not surpassed until the foot (&#;m) Washington Monument in However, being uninhabited, none of these structures actually comply with the modern definition of a skyscraper.

High-rise apartments flourished in classical antiquity. Ancient Romaninsulae in imperial cities reached 10 and more storeys.^[15] Beginning with Augustus (r. 30&#;BC&#;AD), several emperors attempted to establish limits of 20–25&#;m for multi-storey buildings, but met with only limited success.^[16][17] Lower floors were typically occupied by shops or wealthy families, the upper rented to the lower classes.^[15] Surviving Oxyrhynchus Papyri indicate that seven-storey buildings existed in provincial towns such as in 3rd century AD Hermopolis in Roman Egypt.^[18]

The skylines of many important medieval cities had large numbers of high-rise urban towers, built by the wealthy for defense and status. The residential Towers of 12th century Bologna numbered between 80 and at a time, the tallest of which is the &#;m (&#;ft) high Asinelli Tower. A Florentine law of decreed that all urban buildings be immediately reduced to less than 26&#;m.^[19] Even medium-sized towns of the era are known to have proliferations of towers, such as the 72 up to 51&#;m height in San Gimignano.^[19]

The medieval Egyptian city of Fustat housed many high-rise residential buildings, which Al-Muqaddasi in the 10th century described as resembling minarets. Nasir Khusraw in the early 11th century described some of them rising up to 14 storeys, with roof gardens on the top floor complete with ox-drawn water wheels for irrigating them.^[20]Cairo in the 16th century had high-rise apartment buildings where the two lower floors were for commercial and storage purposes and the multiple storeys above them were rented out to tenants.^[21] An early example of a city consisting entirely of high-rise housing is the 16th-century city of Shibam in Yemen. Shibam was made up of over tower houses,^[22] each one rising 5 to 11 storeys high,^[23] with each floor being an apartment occupied by a single family. The city was built in this way in order to protect it from Bedouin attacks.^[22] Shibam still has the tallest mudbrick buildings in the world, with many of them over 30&#;m (98&#;ft) high.^[24]

An early modern example of high-rise housing was in 17th-century Edinburgh, Scotland, where a defensive city wall defined the boundaries of the city. Due to the restricted land area available for development, the houses increased in height instead. Buildings of 11 storeys were common, and there are records of buildings as high as 14 storeys. Many of the stone-built structures can still be seen today in the old town of Edinburgh. The oldest iron framed building in the world, although only partially iron framed, is The Flaxmill (also locally known as the "Maltings"), in Shrewsbury, England. Built in , it is seen as the "grandfather of skyscrapers", since its fireproof combination of cast iron columns and cast iron beams developed into the modern steel frame that made modern skyscrapers possible. In funding was confirmed to convert the derelict building into offices.^[25]

Early skyscrapers[edit]

In , Elisha Otis introduced the safety elevator, allowing convenient and safe passenger movement to upper floors, at the E.V. Haughwout Building in New York City. Otis later introduced the first commercial passenger elevators to the Equitable Life Building in , considered by a portion of New Yorkers to be the first skyscraper. Another crucial development was the use of a steel frame instead of stone or brick, otherwise the walls on the lower floors on a tall building would be too thick to be practical. An early development in this area was Oriel Chambers in Liverpool, England. It was only five floors high.^[26][27][28] Further developments led to what many individuals and organizations consider the world's first skyscraper, the ten-story Home Insurance Building in Chicago, built in –^[29] While its original height of &#;m (&#;ft) is not considered very impressive today, it was at that time. The building of tall buildings in the s gave the skyscraper its first architectural movement the Chicago School, which developed what has been called the Commercial Style.^[30]

The architect, Major William Le Baron Jenney, created a load-bearing structural frame. In this building, a steel frame supported the entire weight of the walls, instead of load-bearing walls carrying the weight of the building. This development led to the "Chicago skeleton" form of construction. In addition to the steel frame, the Home Insurance Building also utilized fireproofing, elevators, and electrical wiring, key elements in most skyscrapers today.^[31]

Burnham and Root's 45&#;m (&#;ft) Rand McNally Building in Chicago, , was the first all-steel framed skyscraper,^[32] while Louis Sullivan's 41&#;m (&#;ft) Wainwright Building in St. Louis, Missouri, , was the first steel-framed building with soaring vertical bands to emphasize the height of the building and is therefore considered to be the first early skyscraper.

In , the Mole Antonelliana in Italy was &#;m (&#;ft) tall.

Most early skyscrapers emerged in the land-strapped areas of Chicago and New York City toward the end of the 19th century. A land boom in Melbourne, Australia between and spurred the creation of a significant number of early skyscrapers, though none of these were steel reinforced and few remain today. Height limits and fire restrictions were later introduced. London builders soon found building heights limited due to a complaint from Queen Victoria, rules that continued to exist with few exceptions.

Concerns about aesthetics and fire safety had likewise hampered the development of skyscrapers across continental Europe for the first half of the twentieth century. Some notable exceptions are the 43&#;m (&#;ft) tall Witte Huis(White House) in Rotterdam; the Royal Liver Building in Liverpool, completed in and 90&#;m (&#;ft) high;^[33] the 57&#;m (&#;ft) tall Marx House in Düsseldorf, Germany; the 61&#;m (&#;ft) Kungstornen(Kings' Towers) in Stockholm, Sweden, which were built –25,^[34] the 89&#;m (&#;ft) Edificio Telefónica in Madrid, Spain, built in ; the &#;m (&#;ft) Boerentoren in Antwerp, Belgium, built in ; the 66&#;m (&#;ft) Prudential Building in Warsaw, Poland, built in ; and the &#;m (&#;ft) Torre Piacentini in Genoa, Italy, built in

After an early competition between Chicago and New York City for the world's tallest building, New York took the lead by with the completion of the &#;m (&#;ft) tall American Surety Building, leaving New York with the title of the world's tallest building for many years.

Modern skyscrapers[edit]

Completed in , the Empire State Building in New York City was the tallest building in the world for nearly 40 years.

Opened in , the World Trade Center in New York City dethroned the Empire State Building as tallest in the world from to

Completed in , the Sears Tower in Chicago dethroned the World Trade Center, and was the tallest in the world from to

Modern skyscrapers are built with steel or reinforced concrete frameworks and curtain walls of glass or polished stone. They use mechanical equipment such as water pumps and elevators. Since the s, according to the CTBUH, the skyscraper has been reoriented away from a symbol for North American corporate power to instead communicate a city or nation's place in the world.^[35]

Skyscraper construction entered a three-decades-long era of stagnation in due to the Great Depression and then World War II. Shortly after the war ended, the Soviet Union began construction on a series of skyscrapers in Moscow. Seven, dubbed the "Seven Sisters", were built between and ; and one, the Main building of Moscow State University, was the tallest building in Europe for nearly four decades (–). Other skyscrapers in the style of Socialist Classicism were erected in East Germany (Frankfurter Tor), Poland (PKiN), Ukraine (Hotel Ukrayina), Latvia (Academy of Sciences) and other Eastern Bloc countries. Western European countries also began to permit taller skyscrapers during the years immediately following World War II. Early examples include Edificio España (Spain) Torre Breda (Italy).

From the s onward, skyscrapers began to appear in various cities in East and Southeast Asia as well as in Latin America. Finally, they also began to be constructed in cities of Africa, the Middle East, South Asia and Oceania from the late s on.

Skyscraper projects after World War II typically rejected the classical designs of the early skyscrapers, instead embracing the uniform international style; many older skyscrapers were redesigned to suit contemporary tastes or even demolished—such as New York's Singer Building, once the world's tallest skyscraper.

German architect Ludwig Mies van der Rohe became one of the world's most renowned architects in the second half of the 20th century. He conceived of the glass façade skyscraper^[36] and, along with Norwegian Fred Severud,^[37] he designed the Seagram Building in , a skyscraper that is often regarded as the pinnacle of the modernist high-rise architecture.^[38]

Skyscraper construction surged throughout the s. The impetus behind the upswing was a series of transformative innovations^[39] which made it possible for people to live and work in "cities in the sky".^[40]

In the early s structural engineer Fazlur Rahman Khan, considered the "father of tubular designs" for high-rises,^[41] discovered that the dominating rigid steel frame structure was not the only system apt for tall buildings, marking a new era of skyscraper construction in terms of multiple structural systems.^[42] His central innovation in skyscraper design and construction was the concept of the "tube" structural system, including the "framed tube", "trussed tube", and "bundled tube".^[43] His "tube concept", using all the exterior wall perimeter structure of a building to simulate a thin-walled tube, revolutionized tall building design.^[44] These systems allow greater economic efficiency,^[45] and also allow skyscrapers to take on various shapes, no longer needing to be rectangular and box-shaped.^[46] The first building to employ the tube structure was the Chestnut De-Witt apartment building,^[39] this building is considered to be a major development in modern architecture.^[39] These new designs opened an economic door for contractors, engineers, architects, and investors, providing vast amounts of real estate space on minimal plots of land.^[40] Over the next fifteen years, many towers were built by Fazlur Rahman Khan and the "Second Chicago School",^[47] including the hundred-storey John Hancock Center and the massive &#;m (1,&#;ft) Willis Tower.^[48] Other pioneers of this field include Hal Iyengar, William LeMessurier, and Minoru Yamasaki, the architect of the World Trade Center.

Many buildings designed in the 70s lacked a particular style and recalled ornamentation from earlier buildings designed before the 50s. These design plans ignored the environment and loaded structures with decorative elements and extravagant finishes.^[49] This approach to design was opposed by Fazlur Khan and he considered the designs to be whimsical rather than rational. Moreover, he considered the work to be a waste of precious natural resources.^[50] Khan's work promoted structures integrated with architecture and the least use of material resulting in the least carbon emission impact on the environment.^[51] The next era of skyscrapers will focus on the environment including performance of structures, types of material, construction practices, absolute minimal use of materials/natural resources, embodied energy within the structures, and more importantly, a holistically integrated building systems approach.^[49]

Modern building practices regarding supertall structures have led to the study of "vanity height".^[52][53] Vanity height, according to the CTBUH, is the distance between the highest floor and its architectural top (excluding antennae, flagpole or other functional extensions). Vanity height first appeared in New York City skyscrapers as early as the s and s but supertall buildings have relied on such uninhabitable extensions for on average 30% of their height, raising potential definitional and sustainability issues.^[54][55][56] The current era of skyscrapers focuses on sustainability, its built and natural environments, including the performance of structures, types of materials, construction practices, absolute minimal use of materials and natural resources, energy within the structure, and a holistically integrated building systems approach. LEED is a current green building standard.^[57]

Architecturally, with the movements of Postmodernism, New Urbanism and New Classical Architecture, that established since the s, a more classical approach came back to global skyscraper design, that remains popular today.^[58] Examples are the Wells Fargo Center, NBC Tower, Parkview Square, 30 Park Place, the Messeturm, the iconic Petronas Towers and Jin Mao Tower.

Other contemporary styles and movements in skyscraper design include organic, sustainable, neo-futurist, structuralist, high-tech, deconstructivist, blob, digital, streamline, novelty, critical regionalist, vernacular, Neo Art Deco and neo-historist, also known as revivalist.

3 September is the global commemorative day for skyscrapers, called "Skyscraper Day".^[59]

New York City developers competed among themselves, with successively taller buildings claiming the title of "world's tallest" in the s and early s, culminating with the completion of the &#;m (1,&#;ft) Chrysler Building in and the &#;m (1,&#;ft) Empire State Building in , the world's tallest building for forty years. The first completed &#;m (1,&#;ft) tall World Trade Center tower became the world's tallest building in However, it was overtaken by the Sears Tower (now Willis Tower) in Chicago within two years. The &#;m (1,&#;ft) tall Sears Tower stood as the world's tallest building for 24 years, from until , until it was edged out by &#;m (1,&#;ft) Petronas Twin Towers in Kuala Lumpur, which held the title for six years.

Design and construction[edit]

The design and construction of skyscrapers involves creating safe, habitable spaces in very tall buildings. The buildings must support their weight, resist wind and earthquakes, and protect occupants from fire. Yet they must also be conveniently accessible, even on the upper floors, and provide utilities and a comfortable climate for the occupants. The problems posed in skyscraper design are considered among the most complex encountered given the balances required between economics, engineering, and construction management.

One common feature of skyscrapers is a steel framework from which curtain walls are suspended, rather than load-bearing walls of conventional construction. Most skyscrapers have a steel frame that enables them to be built taller than typical load-bearing walls of reinforced concrete. Skyscrapers usually have a particularly small surface area of what are conventionally thought of as walls. Because the walls are not load-bearing most skyscrapers are characterized by surface areas of windows made possible by the concept of steel frame and curtain wall. However, skyscrapers can also have curtain walls that mimic conventional walls and have a small surface area of windows.

The concept of a skyscraper is a product of the industrialized age, made possible by cheap fossil fuel derived energy and industrially refined raw materials such as steel and concrete. The construction of skyscrapers was enabled by steel frame construction that surpassed brick and mortar construction starting at the end of the 19th century and finally surpassing it in the 20th century together with reinforced concrete construction as the price of steel decreased and labour costs increased.

The steel frames become inefficient and uneconomic for supertall buildings as usable floor space is reduced for progressively larger supporting columns.^[60] Since about , tubular designs have been used for high rises. This reduces the usage of material (more efficient in economic terms – Willis Tower uses a third less steel than the Empire State Building) yet allows greater height. It allows fewer interior columns, and so creates more usable floor space. It further enables buildings to take on various shapes.

Elevators are characteristic to skyscrapers. In Elisha Otis introduced the safety elevator, allowing convenient and safe passenger movement to upper floors. Another crucial development was the use of a steel frame instead of stone or brick, otherwise the walls on the lower floors on a tall building would be too thick to be practical. Today major manufacturers of elevators include Otis, ThyssenKrupp, Schindler, and KONE.

Advances in construction techniques have allowed skyscrapers to narrow in width, while increasing in height. Some of these new techniques include mass dampers to reduce vibrations and swaying, and gaps to allow air to pass through, reducing wind shear.^[61]

Basic design considerations[edit]

Good structural design is important in most building design, but particularly for skyscrapers since even a small chance of catastrophic failure is unacceptable given the high price. This presents a paradox to civil engineers: the only way to assure a lack of failure is to test for all modes of failure, in both the laboratory and the real world. But the only way to know of all modes of failure is to learn from previous failures. Thus, no engineer can be absolutely sure that a given structure will resist all loadings that could cause failure, but can only have large enough margins of safety such that a failure is acceptably unlikely. When buildings do fail, engineers question whether the failure was due to some lack of foresight or due to some unknowable factor.

Loading and vibration[edit]

The load a skyscraper experiences is largely from the force of the building material itself. In most building designs, the weight of the structure is much larger than the weight of the material that it will support beyond its own weight. In technical terms, the dead load, the load of the structure, is larger than the live load, the weight of things in the structure (people, furniture, vehicles, etc.). As such, the amount of structural material required within the lower levels of a skyscraper will be much larger than the material required within higher levels. This is not always visually apparent. The Empire State Building's setbacks are actually a result of the building code at the time ( Zoning Resolution), and were not structurally required. On the other hand, John Hancock Center's shape is uniquely the result of how it supports loads. Vertical supports can come in several types, among which the most common for skyscrapers can be categorized as steel frames, concrete cores, tube within tube design, and shear walls.

The wind loading on a skyscraper is also considerable. In fact, the lateral wind load imposed on supertall structures is generally the governing factor in the structural design. Wind pressure increases with height, so for very tall buildings, the loads associated with wind are larger than dead or live loads.

Other vertical and horizontal loading factors come from varied, unpredictable sources, such as earthquakes.

Steel frame[edit]

By , steel had replaced cast iron as skyscrapers' structural material. Its malleability allowed it to be formed into a variety of shapes, and it could be riveted, ensuring strong connections.^[62] The simplicity of a steel frame eliminated the inefficient part of a shear wall, the central portion, and consolidated support members in a much stronger fashion by allowing both horizontal and vertical supports throughout. Among steel's drawbacks is that as more material must be supported as height increases, the distance between supporting members must decrease, which in turn increases the amount of material that must be supported. This becomes inefficient and uneconomic for buildings above 40 storeys tall as usable floor spaces are reduced for supporting column and due to more usage of steel.^[60]

Tube structural systems[edit]

The Willis Tower in Chicago showing the bundled tube frame design

A new structural system of framed tubes was developed by Fazlur Rahman Khan in The framed tube structure is defined as "a three dimensional space structure composed of three, four, or possibly more frames, braced frames, or shear walls, joined at or near their edges to form a vertical tube-like structural system capable of resisting lateral forces in any direction by cantilevering from the foundation".^[63][64] Closely spaced interconnected exterior columns form the tube. Horizontal loads (primarily wind) are supported by the structure as a whole. Framed tubes allow fewer interior columns, and so create more usable floor space, and about half the exterior surface is available for windows. Where larger openings like garage doors are required, the tube frame must be interrupted, with transfer girders used to maintain structural integrity. Tube structures cut down costs, at the same time allowing buildings to reach greater heights. Concrete tube-frame construction^[43] was first used in the DeWitt-Chestnut Apartment Building, completed in Chicago in ,^[65] and soon after in the John Hancock Center and World Trade Center.

The tubular systems are fundamental to tall building design. Most buildings over storeys constructed since the s now use a tube design derived from Khan's structural engineering principles,^[60][66] examples including the construction of the World Trade Center, Aon Center, Petronas Towers, Jin Mao Building, and most other supertall skyscrapers since the s.^[43] The strong influence of tube structure design is also evident in the construction of the current tallest skyscraper, the Burj Khalifa.^[46]

Trussed tube and X-bracing[edit]

Changes of structure with height; the tubular systems are fundamental for supertall buildings.

Khan pioneered several other variations of the tube structure design.^{[citation needed]} One of these was the concept of X-bracing, or the trussed tube, first employed for the John Hancock Center. This concept reduced the lateral load on the building by transferring the load into the exterior columns. This allows for a reduced need for interior columns thus creating more floor space. This concept can be seen in the John Hancock Center, designed in and completed in One of the most famous buildings of the structural expressionist style, the skyscraper's distinctive X-bracing exterior is actually a hint that the structure's skin is indeed part of its 'tubular system'. This idea is one of the architectural techniques the building used to climb to record heights (the tubular system is essentially the spine that helps the building stand upright during wind and earthquake loads). This X-bracing allows for both higher performance from tall structures and the ability to open up the inside floorplan (and usable floor space) if the architect desires.

The John Hancock Center was far more efficient than earlier steel-frame structures. Where the Empire State Building (), required about kilograms of steel per square metre and 28 Liberty Street () required , the John Hancock Center required only ^[45] The trussed tube concept was applied to many later skyscrapers, including the Onterie Center, Citigroup Center and Bank of China Tower.^[67]

Bundled tube[edit]

An important variation on the tube frame is the bundled tube, which uses several interconnected tube frames. The Willis Tower in Chicago used this design, employing nine tubes of varying height to achieve its distinct appearance. The bundled tube structure meant that "buildings no longer need be boxlike in appearance: they could become sculpture."^[46]

The elevator conundrum[edit]

The invention of the elevator was a precondition for the invention of skyscrapers, given that most people would not (or could not) climb more than a few flights of stairs at a time. The elevators in a skyscraper are not simply a necessary utility, like running water and electricity, but are in fact closely related to the design of the whole structure: a taller building requires more elevators to service the additional floors, but the elevator shafts consume valuable floor space. If the service core, which contains the elevator shafts, becomes too big, it can reduce the profitability of the building. Architects must therefore balance the value gained by adding height against the value lost to the expanding service core.^[68]

Many tall buildings use elevators in a non-standard configuration to reduce their footprint. Buildings such as the former World Trade Center Towers and Chicago's John Hancock Center use sky lobbies, where express elevators take passengers to upper floors which serve as the base for local elevators. This allows architects and engineers to place elevator shafts on top of each other, saving space. Sky lobbies and express elevators take up a significant amount of space, however, and add to the amount of time spent commuting between floors.

Other buildings, such as the Petronas Towers, use double-deck elevators, allowing more people to fit in a single elevator, and reaching two floors at every stop. It is possible to use even more than two levels on an elevator, although this has never been done. The main problem with double-deck elevators is that they cause everyone in the elevator to stop when only person on one level need to get off at a given floor.

Buildings with sky lobbies include the World Trade Center, Petronas Twin Towers, Willis Tower and Taipei The 44th-floor sky lobby of the John Hancock Center also featured the first high-rise indoor swimming pool, which remains the highest in America.^[69]

Economic rationale[edit]

Skyscrapers are usually situated in city centers where the price of land is high. Constructing a skyscraper becomes justified if the price of land is so high that it makes economic sense to build upward as to minimize the cost of the land per the total floor area of a building. Thus the construction of skyscrapers is dictated by economics and results in skyscrapers in a certain part of a large city unless a building code restricts the height of buildings.

Skyscrapers are rarely seen in small cities and they are characteristic of large cities, because of the critical importance of high land prices for the construction of skyscrapers. Usually only office, commercial and hotel users can afford the rents in the city center and thus most tenants of skyscrapers are of these classes.

Today, skyscrapers are an increasingly common sight where land is expensive, as in the centers of big cities, because they provide such a high ratio of rentable floor space per unit area of land.

One problem with skyscrapers is car parking. In the largest cities most people commute via public transport, but in smaller cities many parking spaces are needed. Multi-storey car parks are impractical to build very tall, so much land area is needed.

Another disadvantage of very high skyscrapers is the loss of usable floorspace, as many elevator shafts are needed to enable performant vertical travelling. This led to the introduction of express lifts and sky lobbys where transfer to slower distribution lifts can be done.

Environmental impact[edit]

30 St Mary Axe in London is an example of a modern environmentally friendly skyscraper.

The amount of steel, concrete, and glass needed to construct a single skyscraper is large, and these materials represent a great deal of embodied energy. Skyscrapers are thus energy intensive buildings, but skyscrapers have a long lifespan, for example the Empire State Building in New York City, United States completed in and is still in active use.

Skyscrapers have considerable mass, which means that they must be built on a sturdier foundation than would be required for shorter, lighter buildings. Building materials must also be lifted to the top of a skyscraper during construction, requiring more energy than would be necessary at lower heights. Furthermore, a skyscraper consumes much electricity because potable and non-potable water have to be pumped to the highest occupied floors, skyscrapers are usually designed to be mechanically ventilated, elevators are generally used instead of stairs, and natural lighting cannot be utilized in rooms far from the windows and the windowless spaces such as elevators, bathrooms and stairwells.

Skyscrapers can be artificially lit and the energy requirements can be covered by renewable energy or other electricity generation with low greenhouse gas emissions. Heating and cooling of skyscrapers can be efficient, because of centralized HVAC systems, heat radiation blocking windows and small surface area of the building. There is Leadership in Energy and Environmental Design (LEED) certification for skyscrapers. For example, the Empire State Building received a gold Leadership in Energy and Environmental Design rating in September and the Empire State Building is the tallest LEED certified building in the United States,^[70] proving that skyscrapers can be environmentally friendly. Also the 30 St Mary Axe in London, the United Kingdom is an environmentally friendly skyscraper.

In the lower levels of a skyscraper a larger percentage of the building cross section must be devoted to the building structure and services than is required for lower buildings:

• More structure – because it must be stronger to support more floors above
• The elevator conundrum creates the need for more lift shafts—everyone comes in at the bottom and they all have to pass through the lower part of the building to get to the upper levels.
• Building services – power and water enter the building from below and have to pass through the lower levels to get to the upper levels.

In low-rise structures, the support rooms (chillers, transformers, boilers, pumps and air handling units) can be put in basements or roof space—areas which have low rental value. There is, however, a limit to how far this plant can be located from the area it serves. The farther away it is the larger the risers for ducts and pipes from this plant to the floors they serve and the more floor area these risers take. In practice this means that in highrise buildings this plant is located on 'plant levels' at intervals up the building.

History of the tallest skyscrapers[edit]

At the beginning of the 20th century, New York City was a center for the Beaux-Arts architectural movement, attracting the talents of such great architects as Stanford White and Carrere and Hastings. As better construction and engineering technology became available as the century progressed, New York City and Chicago became the focal point of the competition for the tallest building in the world. Each city's striking skyline has been composed of numerous and varied skyscrapers, many of which are icons of 20th-century architecture:

• The E. V. Haughwout Building in Manhattan, is considered by a portion of New Yorkers to be the world's first skyscraper due to the fact it was the first building to install successfully a passenger elevator, on 23 March
• The Equitable Life Building in Manhattan, is considered by another portion of New Yorkers to be the world's first skyscraper due to the fact it was the first office building to feature passenger elevators.
• The Home Insurance Building in Chicago, which was built in , is considered by many people to be the world's first skyscraper due to its steel skeleton.^[71] Subsequent buildings such as the Singer Building and the Metropolitan Life Tower were higher still.
• The Flatiron Building, designed by Daniel Hudson Burnham and standing &#;ft (87&#;m) high, was one of the tallest buildings in New York City upon its completion in , made possible by its steel skeleton. While it was never the world's tallest building, it was one of the first buildings designed with a steel framework, and to achieve this height with other construction methods of that time would have been very difficult. The Tower Building, designed by Bradford Gilbert and built in , is considered by some to be New York City's first skyscraper, and may have been the first building in New York City to use a skeletal steel frame.^[72]
• The Metropolitan Life Insurance Company Tower, completed in across Madison Square Park from the Flatiron Building, was designed by the architectural firm of Napoleon LeBrun & Sons and stood feet (&#;m) tall. Until it was the tallest building in the world.^[73]
• The Woolworth Building, a neo-Gothic "Cathedral of Commerce" overlooking New York City Hall, was designed by Cass Gilbert. At &#;feet (&#;m), it became the world's tallest building upon its completion in , an honor it retained until
• 40 Wall Street, a story, foot-tall (&#;m) neo-Gothic building designed by H. Craig Severance, was the world's tallest building for a month in May ^[74][75]
• In late May the Chrysler Building took the lead as the tallest building in the world, scraping the sky at 1,&#;feet (&#;m).^[76] Designed by William Van Alen, an Art Deco style masterpiece with an exterior crafted of brick,^[77] the Chrysler Building continues to be a favorite of New Yorkers to this day.^[78]
• The Empire State Building, the first building to have more than floors (it has ), was completed the following year. It was designed by Shreve, Lamb and Harmon in the contemporary Art Deco style. The tower takes its name from the nickname of New York State. Upon its completion in at 1,&#;feet (&#;m), it took the top spot as tallest building, and towered above all other buildings until The antenna mast added in brought pinnacle height to 1,&#;feet (&#;m), lowered in to 1,&#;feet (&#;m).^[79]
• The World Trade Center officially surpassed the Empire State Building in , was completed in , and consisted of two tall towers and several smaller buildings. For a short time, the first of the two towers was the world's tallest building. Upon completion, the towers stood for 28&#;years, until the September 11 attacks destroyed the buildings in Various governmental entities, financial firms, and law firms called the towers home.
• The Willis Tower (formerly Sears Tower) was completed in , one year after the World Trade Center, and surpassed it as the world's tallest building. It was the first building to employ the "bundled tube" structural system, designed by Fazlur Khan. The building was not surpassed in height until the Petronas Towers were constructed in , but remained the tallest in some categories until Burj Khalifa surpassed it in all categories in It is currently the second tallest building in the United States, after One World Trade Center, which was built to replace the destroyed towers.

Momentum in setting records passed from the United States to other nations with the opening of the Petronas Twin Towers in Kuala Lumpur, Malaysia, in The record for the world's tallest building has remained in Asia since the opening of Taipei in Taipei, Taiwan, in A number of architectural records, including those of the world's tallest building and tallest free-standing structure, moved to the Middle East with the opening of the Burj Khalifa in Dubai, United Arab Emirates.

This geographical transition is accompanied by a change in approach to skyscraper design. For much of the twentieth century large buildings took the form of simple geometrical shapes. This reflected the "international style" or modernist philosophy shaped by Bauhaus architects early in the century. The last of these, the Willis Tower and World Trade Center towers in New York, erected in the s, reflect the philosophy. Tastes shifted in the decade which followed, and new skyscrapers began to exhibit postmodernist influences. This approach to design avails itself of historical elements, often adapted and re-interpreted, in creating technologically modern structures. The Petronas Twin Towers recall Asian pagoda architecture and Islamic geometric principles. Taipei likewise reflects the pagoda tradition as it incorporates ancient motifs such as the ruyi symbol. The Burj Khalifa draws inspiration from traditional Islamic art. Architects in recent years have sought to create structures that would not appear equally at home if set in any part of the world, but that reflect the culture thriving in the spot where they stand.^{[citation needed]}

The following list measures height of the roof.^{[80][failed verification]} The more common gauge is the "highest architectural detail"; such ranking would have included Petronas Towers, built in